How to Reprogram a lock as a guest or common door? (Tablet DTU)

TABLET DTU:
*Double click the DTU Icon and select yes on allowing changes
*Make Sure the Date/Time is Correct in the upper right hand corner before reprogramming
*To Exit the DTU Software:
From Main Menu, Select Setup DTU, select Exit
(Selecting Bye will not exit the software!)

With DTU Software Open –
Sign in w/ Staff Code
a.) Select IrDA (skip if it doesn’t ask you)
b.) on Main Menu select Lock Initialization
c.) select Guest Door
d.) Set the Room No., Set Floor No. and press confirm (bottom right)
e.) Use DTU card against door and put away, light should be orange, Lock can only be programmed with Orange Light Is On
f.) Aim DTU Tablet and press send
*If you have the P-Type (Wide) locks, aim at the Upper Right corner (3-4 inches away) as shown in the picture
*If you have the Slim Type locks, aim at the Center (3-4 inches away)
*If you have a wall reader (square matte black box), aim at the center

With DTU Software Open—
Sign in w/ Staff Code
a.) Select IrDA (skip if it doesn’t ask you)
b.) on Main Menu select Lock Initialization
c.) select Common Door
d.) Set the Room No (Room # is not important w/ common doors)
e.) Set the Room Range (Hotel’s Lowest Room# to Highest Room#), Then Press Confirm
f.) If you want guests to only be able to use during certain hours, i.e. gym/pool door, enter Guest Start/End Time using military time.
f2.) If you want to door to stay unlocked and not require a key card during certain hours, scroll down, go to Auto Time Zone and set the start and end hours military time
g.) Use DTU card against door should light Orange and put away card, Lock can only be programmed with Orange Light Is On
h.) Aim DTU Tablet and press send
*If you have the P-Type (Wide) locks, aim at the Upper Right corner (3-4 inches away) as shown in the picture
*If you have the Slim Type locks, aim at the Center (3-4 inches away)
*If you have a wall reader (square matte black box), aim at the center

Note: If you want to disable guests and only allow staff to enter a room:
Program it as a common door, but on step f, change the guest start to 00:00 and guest end to 00:01

If you lost your DTU Card- you can make a new one from the Front Desk ALV2 PC Server
Log in as a manager, and click on Management, click on the DTU Card.
Make sure the Duplicate box is Checked, and issue the card.
You'll have to use a management key